Requirements for using the Star Micronics TSP143IIIW Wi-Fi receipt printer
Before you set up the Star Micronics TSP143IIIW Wi-Fi receipt printer with Shopify POS, make sure that your store and devices meet the following hardware and software requirements:
- You use Shopify POS.
- You have a compatible iPad running iPadOS 15.1 or higher, an iPhone running iOS 15.1 or higher, or a compatible Android device running Android 10.0 or higher.
On this page
Considerations when using the Star Micronics TSP143IIIW receipt printer
Before you choose the Star Micronics TSP143IIIW receipt printer, review the following considerations:
- If multiple receipt printers are paired with Shopify POS, then paper receipts print from the default printer in Shopify POS. You can set the Star Micronics TSP143IIIW receipt printer as the default printer.
- The TSP143IIIW receipt printer only connects to 2.4 GHz Wi-Fi networks. If your router uses a dual-band network, then make sure you connect the printer to the 2.4 GHz band. It won't connect on a 5 GHz network.
Where to buy the Star Micronics TSP143IIIW Wi-Fi receipt printer
The Star Micronics TSP143IIIW Wi-Fi receipt printer is available from the Shopify Hardware Store in supported countries.
Printer paper requirements for your Star Micronics TSP143IIIW Wi-Fi receipt printer
Any thermal paper rolls with the following dimensions work with the printer:
- width is 3 1/8" (80mm)
- length is no more than 230 feet (70m)
For an explanation of how to load the receipt printer, refer to the guide in the manufacturer's hardware manual.