Help
Log in

Setting up the Epson TM-m30II receipt printer

Follow this guide to connect your Epson TM-m30II receipt printer with Shopify POS, load paper, and make sure everything is set up for smooth in-person sales.

On this page

Plug in your Epson TM-m30II receipt printer

Before you can use the Epson TM-m30II receipt printer, you need to connect your printer to the power supply.

Steps:

  1. Remove the panel on the back of the printer.
  2. Plug one end of the power cable into the back of your receipt printer.
  3. Plug the other end of the cable into a power outlet and turn on the printer.
  4. Reattach the back panel of the printer.

If the paper is loaded, then a diagnostic report prints.

Choose how to connect your Epson TM-m30II receipt printer

You can connect the Epson TM-m30II receipt printer in the following ways:

Epson TM-m30II receipt printer connection types and considerations when using Shopify POS
Connection typeConsiderations
USB with the Shopify POS HubRecommended for the most reliable setup. Compatible with iPad and Android devices.
BluetoothCompatible with iPad, iPhone, or Android devices. The receipt printer connects automatically whenever both devices are turned on and in range.
Ethernet (LAN)Compatible with iOS and Android devices. Plug the printer into your router with an Ethernet cable. LAN-capable printers connect to your router, not the POS Hub.
USB-B cableCompatible with Android devices only.

Pair and connect the Epson TM-m30II receipt printer with your POS device

To use the Epson TM-m30II receipt printer with Shopify POS, pair the reader with your device through Shopify POS. After the printer and device are paired, the printer connects to the device automatically whenever both are powered on and in range.

After connecting your printer, don't forget to:

Connect your Epson TM-m30II receipt printer with Bluetooth

You can connect your printer using Bluetooth and an iPhone, iPad, or Android device.

Steps:

  1. In Shopify POS, tap the Connectivity Icon icon.
  2. Tap + Add hardware > Receipt printers > Epson > Bluetooth > TM30II.
  3. Connect your printer to the power supply.
  4. Open the top panel and load receipt paper.
  5. With the panel open, press and hold the button to feed paper until the paper light flashes. Release the button and close the panel.
  6. An instruction sheet prints. Quickly press and release the button one time to feed the paper into the printer.
  7. Press and hold the button for around 1 second to feed the paper into the printer. A Bluetooth status sheet prints and the Bluetooth light flashes.
  8. Tap Select an accessory > TM30II.

Connect your Epson TM-m30II receipt printer with USB

You can connect your Epson TM-m30II receipt printer by USB in the following ways:

  • With the Shopify POS Hub to a compatible iPad or Android device.
  • With a direct USB-B cable to a compatible Android device.
Shopify POS Hub

Steps:

  1. Before you connect your hardware to the Shopify POS Hub, set up the POS Hub:

    1. Plug the Shopify POS Hub power cord into a power source.
    2. Connect the Shopify POS Hub's USB-C or Lightning cable to your POS device.
    3. Plug the other end of the Shopify POS Hub's USB-C or Lightning cable into the tablet port on the bottom of the Shopify POS Hub. Don't use any other USB-C port on the Shopify POS Hub for the tablet cable.

  2. Remove the back panel of the printer.

  3. Remove the bottom panel of the printer.

  4. Connect your printer to the power supply.

  5. Connect one end of the USB-B cable to the printer, and then connect the other end to a USB port on the Shopify POS Hub.

  6. After a few moments, Shopify POS connects to the printer. If prompted by the device, then allow the printer connection.

  7. Confirm that your printer displays as connected under Receipt Printers.

  8. Reattach the bottom panel and back panel of the printer.

Android direct USB-B

Steps:

  1. Remove the back panel of the printer.
  2. Remove the bottom panel of the printer.
  3. Connect your printer to the power supply.
  4. Connect one end of the USB-B cable to the printer, and then connect the other end to your Android device or Shopify POS Tablet Stand (USB-C).
  5. After a few moments, Shopify POS connects to the printer. If prompted by the device, then allow the printer connection.
  6. Confirm that your printer displays as connected under Receipt Printers.
  7. Reattach the bottom panel and back panel of the printer.

Connect your Epson TM-m30II receipt printer with Ethernet/LAN

You can connect your printer using an Ethernet cable and an iPhone, iPad, or Android device.

Steps:

  1. Remove the back panel and the bottom panel of the printer.
  2. Load receipt paper.
  3. Connect your printer to the power supply.
  4. Connect one end of the Ethernet cable to the printer and one to either your router or LAN connection.
  5. Open Shopify POS and then tap the Connectivity Icon icon.
  6. Tap + Add hardware > Receipt Printer.
  7. In the Available network printers section, tap your printer model.
  8. Optional: test which printer you're setting up by tapping Print test receipt.
  9. Reattach the bottom panel and back panel of the printer.

Backup printers

If your default receipt printer disconnects when you select to print a receipt during a checkout flow, such as order or gift card, then a dialog displays on the Shopify POS screen that allows you to select a backup printer to connect to. All paired and unpaired network printers display. Tap Print next to one of the printers in the Paired printers section or tap Connect next to one of the printers in the Available network printers section to select a new default printer.

Customizing your printed receipts

You can customize both the basic receipt layout and the transaction description on your printed receipts. Learn more about customizing your printed receipts.